安徽譯博翻譯的小編為大家?guī)�來一篇非常實用的翻譯稿件，希望對大家所有幫助！安徽譯博翻譯成立至今一直致力于工程類型稿件翻譯，爭做安徽第一工程類型翻譯服務商！

1.接受 Acceptance

2.裝運和交付Shipping and Delivery

3.單據和付款 Billing and Payment

4.服務質量和檢查 Quality of Workmanship/Inspection

5.指導手冊、安裝調試和運行測試、軟件系統

Instruction Manual, Installation Adjustment and Performance Test, Software System

6.服務和替換零件Maintenance Service and Replacement Parts

7.保證 Warranty

8.不合格貨物或服務 Nonconforming Goods or Services

9.成分說明、特殊警告和指示 Ingredients Disclosure, Special Warnings And Instructions

10.變更 Change

11.買方財產 Buyer’s Property

12.賣方財產 Seller’s Property

13.保險 Insurance

14.知識產權 Intellectual Property Rights

15.保密和不公開宣傳 Confidentiality and No Advertising

16.抵銷/扣除Setoff/Recoupment

17.稅務 Tax

18.海關/出口控制 Customs/Export Controls

19.審計權 Right to Audit

20.不可抗力 Force Majeure

21.合同終止Termination

22.補償 Indemnification

23.救濟措施 Remedies

24.無暗示放棄 No Implied Waiver

25.不得轉讓和分包 No Assignment/No Subcontract

26.可分割性 Severability

27.遵守法律；商務實踐 Compliance with Laws; Employment/Business Practices

28.適用法律 Governing Law

29.雙方關系 Relationship of Parties

30.爭議解決 Dispute Resolution

31.全部協議 Entire Agreement

32.通知 Notice

33.文字 Language

 

1.接受 Acceptance

賣方已審閱了本條款，且同意賣方對本合同下的任何工作或服務的書面接受或開始進行這些工作或服務均僅構成賣方對本條款的接受。賣方提出的有異于或附加于本條款的任何修改應根據本條款第31條作出。

Seller has read and understands these terms and conditions, and agrees that Seller’s written acceptance or commencement of any work or service under this contract shall constitute Seller’s acceptance of these terms and conditions only. Any changes proposed by Seller which are different from or in addition to these terms and conditions shall be made in accordance with Paragraph 31.

除買賣雙方另有書面約定外，雙方同意本條款適用于雙方所簽訂的在合同附件中列明本條款的所有合同。

Unless otherwise agreed in writing by the parties, the parties agree to apply these terms and conditions to all other contracts as long as these terms and conditions are referred to in the attachment by the parties.

 

2.裝運和交付Shipping and Delivery

賣方同意：(a) 將按照買方和相關承運人的要求對貨物適當地包裝、標注及運輸以確保運輸費用為最低；對貨物的包裝應當適于長途運輸、防潮、防濕、防震、防銹、耐裝卸，以確保貨物免于受損，使之完好安全地交付給買方；(b) 按照買方的指示安排貨運路線；(c) 除非本合同中另行說明，將不收取貨物的裝卸費、包裝費、倉儲費、運輸費或拖運費；(d) 在每批裝運貨物的包裝標簽上標明買方的合同號及其啟運日期；(e) 為每箱貨物上適當標明合同號、廠家號、車間號及裝卸碼頭號，當一次發運包含多箱貨物時，在每箱貨物上標明系列號；(f) 按照買方指示和承運人的要求，迅速提交每批貨物的正本提單或其他裝運收據，以及所運輸貨物的正確分類識別號。每一貨包上的標記和裝箱單、提單和發票上的貨物標注應能使買方很容易地辯認出所購貨物；(g）當指定的設備已完成及組裝，但發現為裝運和/或安裝確有必要拆卸時，各部件應標上嵌合符號以便于在工作場地的裝配。裝運時為防止在運輸過程中的破損與扭曲，各部件都應相應地系緊、捆好，裝運發票上應顯示箱號、盒號；且（h）若設備的裝卸需特別指導的，賣方應在裝運之前通知買方，并且賣方代表應參與整個裝卸過程并提供特別指導。

Seller agrees: (a) to properly pack, mark and ship goods in accordance with the requirements of Buyer and involved carriers in a manner to secure the lowest transportation cost; packaging shall be suitable for long-distance transport, moistureproof, waterproof, shockproof, rustproof, resistant to rough loading and unloading, so as to prevent the goods from being damaged and cause the goods to be delivered properly to Buyer; (b) to route shipments in accordance with instructions of Buyer; (c) to make no charge for handling, packaging, storage, transportation or drayage of goods unless otherwise stated in this contract; (d) to provide with each shipment packing slips with Buyer’s contract number and Shipment Date marked thereon; (e) to properly mark each package with the contract number, the factory, plant and dock number, and, where multiple packages comprise a single shipment, to consecutively number each package; (f) to promptly forward the original bill of lading or other shipping receipts, correct classification identification of the goods shipped in accordance with Buyer’s instructions and carrier’s requirements. The marks on each package and identification of the goods on packing slips, bills of lading and invoices shall be sufficient to enable Buyer to easily identify the goods purchased; (g) upon completion and assembly of the equipment specified if it is found necessary for shipping and/or installation purposes to disassemble the said equipment, the parts shall be match-marked to facilitate installation on site. Units shall be suitably braced and packed for shipping to prevent breakage and distortion while in transit. Shipping  invoices shall show the crate, box or carton identification number; and (h) Seller shall notify the Buyer of any special instructions for unloading the equipment prior to its shipment and when special instructions are provided, the Seller’s representative shall be present during the unloading activities.

交付應按照買方交付要求中所規定的數量和時間進行。對于發運給買方的超過買方交付要求中指定數量的貨物，賣方不得要求買方付款。買方可改變預定的發運頻率或臨時指示暫停預定的發運，在此兩種情況下，賣方承諾不改變本合同項下貨物或服務價格和數量。對于數量和/或交付日期未確定的合同，賣方應按照買方在此后發出的有關數量和時間的指示交付。

Deliveries shall be made both in quantities and at times specified in Buyer’s delivery requirements. Buyer shall not be required to make payment for超過買方交付要求中指定數量的貨物 goods delivered to Buyer which are in excess of quantities specified in Buyer’s delivery requirements. Buyer may change the rate of scheduled shipments or direct temporary suspension of scheduled shipments, neither of which shall entitle Seller to a modification of the price for goods or services and its quantities covered by this contract. For contracts of goods or services where quantities and/or delivery schedules are not specified, Seller shall deliver goods in such quantities and times as Buyer may direct in subsequent releases.

若因賣方原因而無法實現買方的交付要求，買方有權：(a) 自行選擇運輸服務提供商并采取比原定方式更加快捷方式進行運輸，上述運輸費用由賣方承擔，買方有權從支付賣方發票金額中扣除此金額；或要求賣方以可能達到的最快速度發運貨物，并由賣方承擔費用。在上述情況下，買方有權向賣方按貨物或服務延誤交付數量的總值每天收取相等于千分之三(3‰)的違約金，最高為合同總值的百分之五(5%); (b) 解除合同并通過其他渠道購買貨物或服務，并向賣方收取該替代產品或服務與合同貨物或服務價格的差額和額外費用，并有權向賣方按貨物或服務延誤交付的總值每日收取相等于千分之三(3‰)的違約金，最高為合同總值的百分之五(5%)。

If Seller’s acts and/or omissions result in Seller’s failure to meet Buyer’s delivery requirements, Buyer shall have the right to: (a) choose the transportation service provider and require a more expeditious method of transportation for goods than the transporting method originally specified by Buyer; the transportation expense otherwise incurred by Buyer shall be borne by Seller and Buyer shall be entitled to deducting such amount upon its payment to Seller, or shipping the goods as expeditiously as possible at Seller’s expense; under the circumstance aforesaid, Buyer is entitled to charging Seller a daily penalty equal to three-tenth percent (3‰) of the total amount of the goods or services delayed, up to the limit of five percent (5%) of the total amount of the contract; (b) terminate the contract and order the goods or services from an alternative source, and to charge the difference or additional cost between the alternative goods or services and the contract goods or services; and Buyer is entitled to charging the Seller a daily penalty equal to three-tenth percent (3‰) of the total amount of the goods or services delayed, up to the limit of five percent (5%) of the total amount of the contract.

 

3.單據和付款 Billing and Payment

賣方同意：(a) 向買方出具符合買方要求的發票作為要求買方付款的憑證；(b) 接受以支票或由買方決定的其他付款方式（包括電匯）付款。除非本合同正面有特別注明的付款日期，付款日期根據賣方是否是中國商業實體而有所不同。對中國商業實體的賣方而言，付款日應為買方收到符合買方要求格式的發票后的下一個月的第二十五日，賣方應在交付貨物或完成服務后（如合同規定賣方有義務提供貨物安裝時，則在貨物安裝完成且買方最終驗收合格后），立即向買方提交發票。對國外商業實體的賣方而言，合同總金額90％的款項以信用證形式支付且付款日應為發運日后的第二個日歷月的結算日，剩余10％的款項以電匯支付；盡管存在上述規定，對電而言，買方在收到貨物或服務或賣方完成貨物安裝，且買方在最終驗收合格之前有權不予付款。賣方應當通過國際接受的快遞服務商向買方送達發票的原件，以確保買方在發運日后第一個月的第七（7）個日歷日前收到上述發票，以便買方付款。若賣方未能在上述期限將符合買方要求的發票送達買方，則買方有權將付款時間予以順延。在本第3條中，“發票日” 指賣方開具正確發票的日期；“發運日” 指清潔提單或空運單上定義的貨物在出口港或者出口機場的發運日(發運日與發票日應當相同或者兩者相差不超過三(3)個日歷日)；及結算日”指根據買方的多邊結算系統和中國的銀行工作日而預先決定的每月一天的結算日。結算日將以附件的形式附于本合同之后或者由買方在每個日歷年之前決定并提供給賣方。

Seller agrees to: (a) issue to Buyer an invoice that is in compliance with Buyer’s requirements as an evidence of billing Buyer to make payment; (b) accept payment by check or, at Buyer’s discretion, other cash equivalent (including electronic transfer of funds). Unless otherwise set forth on the face side of this contract, the payment dates shall be different depending on whether Seller is a Chinese business entity or not. If Seller is a Chinese business entity, payment to Seller will be made on the 25th day of the month following Buyer’s receipt of a proper invoice; Seller shall render invoices immediately to Buyer in accordance with the requirement after delivery of goods or completion of service (if the Contract requires Seller to provide installation services, after completion of installation by Seller and the inspection by Buyer). If Seller is not a Chinese business entity, （90% by L/C on Settlement Date in the second month following the date of shipment, 10% by T/T）payment to Seller will be made on the Settlement Date in the second month after Shipment Date ;  As to , notwithstanding the aforesaid stipulations, Buyer is entitled to withholding payment prior to receiving goods or service or before Seller’s completion of goods installation passing buyer’s inspection. Seller will send a copy of the original invoice via internationally accepted courier services to Buyer no later than the 7th day of the first month following Shipment Date to facilitate prompt payment by Buyer, and if Seller fails to deliver the proper invoice within the period aforesaid, Buyer shall have the right to delay the payment date accordingly. For purposes of this Paragraph 3, “Invoice Issuing Date” means the date that Seller issues correct invoice; “Shipment Date” means the date when the goods are shipped as defined in the clean bill of lading or airway bill at the port or airport of export, as the case may be (the Shipment Date and the Invoice Issuing Date shall be identical or the gap between the Shipment Date and the Invoice Issuing Date shall not be more than three (3) calendar days); and  Settlement Date” shall mean predetermined date once a month based on Buyer’s Multilateral Netting System and working days of banks in China. A list of dates for the Settlement Date is attached hereto as Schedule or will be determined and provided by Buyer prior to the start of each calendar year.

買方對貨物或服務的付款不構成對該貨物或服務質量的認可。若第三方對本合同項下的貨物或服務主張留置、負債或者其他權利的，買方有權拒絕付款并有權要求賣方出具符合買方要求的擔�；蛘弑ＷC。

Buyer’s payment for the goods or services shall not be construed as endorsement of the quality of goods or services. If any third party declares any liens, encumbrances and claims upon the goods or services of the contract, Buyer is entitled to withholding payment and requiring any warranties or representations provided by Seller in accordance with Buyer’s requirements.

 

4.服務質量和檢查 Quality of Workmanship/Inspection

賣方同意為符合買方最大利益而采用有效的、經濟的方法及時地、勤勉地工作，以期達到買方合理的滿意程度。賣方同意使用最優秀的技能和建議、按最高的工程專業規格、標準和規則提供所有服務。賣方同意對于那些買方有正當理由認為不符合前述標準的工作免費為買方重作。

Seller agrees to perform work timely, diligently and to the reasonable satisfaction of Buyer in an efficient and economical manner consistent with the best interests of Buyer. Seller shall use its best skills and judgment and shall perform all services in accordance with the highest engineering professional standards, codes and regulations. Seller agrees to re-do, at no charge to Buyer, any work which in the reasonable opinion of Buyer does not meet the foregoing standard.

賣方同意，買方有權在適當的時間進入賣方場所，對本合同所涵蓋的設施、貨物、材料和任何買方的財產進行檢查。買方對制造中、交付前或交付后的一段合理時間內的貨物進行檢查，不應構成買方對任何在制品或制成品的接受。

Seller agrees that Buyer shall have the right to enter Seller’s facility at reasonable time to inspect the facility, goods, materials and any property of Buyer covered by this contract. Buyer’s inspection of the goods, whether during manufacture, prior to delivery or within a reasonable time after delivery, shall not constitute acceptance of any work-in-process or finished goods.

 

5.指導手冊、安裝調試和運行測試、軟件系統

Instruction Manual, Installation Adjustment and Performance Test, Software System

賣方應按要求提供給買方完整的書面指導操作手冊；內容包括按規格說明書對所提供的全部設備進行合理操作和維修的要求。指導手冊應包括但不限于以下內容：(a)系統描述；(b)安裝和運行指導；(c)所有設備的維護、保養與修理要求；(d)監控和調試；(e)部件清單；和(f)系統電路圖。整套指導手冊應在最后付款前交送給買方。指導手冊中應包括所購設備的建議性備用零件單。

Seller shall be required to provide to Buyer complete sets of instruction manuals covering the proper operation and maintenance requirements of all equipment furnished under the Specification. Instruction manuals shall essentially consist of but not limited to the following sections: (a) description of system; (b) installation and operating instruction; (c) maintenance, keeping and repair requirements for all equipment; (d) controls and adjustments; (e) parts lists; and (f) system electrical wiring diagrams. Instruction manuals must be submitted to Buyer prior to final payment. A recommended spare parts list of the ordered equipment shall be included in the instruction manuals.

除本合同另有約定外，賣方應提供合格且有經驗的專業工程師負責進行本合同項下貨物的安裝和調試。如有必要，安裝和調試完畢后，買賣雙方應當共同對貨物進行運行測試，賣方應當根據實際運行測試情況對貨物作出相應調整，以使貨物在實際情況下能進行最有效的運行。在符合貨物所設計的工作環境和條件下，賣方應保證貨物的正常運行，使其達到合同中所明確的性能水平。除非本合同另有約定，賣方不向買方另行收取貨物安裝、調試和運行測試的任何費用（包括但不限于人員服務費用、差旅費用等）。在貨物安裝、調試和運行測試的過程中，賣方人員應當遵守有關操作規程和買方的安全管理要求，如果出現任何意外事件，應當按照本條款第22條的規定執行。

Unless provided for in the contract, the delivered equipment under the contract will be installed and adjusted under the direction of the Seller qualified and experienced field start-up engineer. If necessary, after installation and adjustment, both Buyer and Seller should conduct performance tests for the goods. Seller shall make adjustments to the goods according to the actual condition of performance tests so as to optimize goods’ operation under the actual condition. Under the working environment and conditions in conformity with what goods are designed for, Seller shall ensure goods normal performance in order to match their capability level defined in the contract. Unless provided for in the contract, Seller will not separately charge Buyer any expenses related to goods installation, adjustment and performance test (including but not limited to personnel service expenses, traveling expenses, etc.) In the process of goods installation, adjustment and performance test, Seller should comply with related operational procedure and Buyer’s security management requirements. If there is any accident, Paragraph 22 should be applied.

如果賣方所提供的機器設備中帶有軟件系統的，該軟件系統應視為本合同項下貨物的組成部分，并適用本合同項下所有條款。為了確保機器設備的正常運行，賣方應當保證該軟件系統在機器設備的整個壽命周期內能夠正常使用。如果軟件系統并非由于買方的過錯而出現任何故障的，無論是否在貨物的質量保證期內，賣方均有義務到機器設備所在地免費為買方進行軟件系統的修復或重裝。鑒于，軟件系統與機器設備的不可分割性，賣方許可買方在機器設備報廢之前對其中的軟件系統擁有全球的、免費的、不可撤銷的非獨占使用權。

如果賣方在向買方銷售機器設備后，自行對該類機器設備的軟件系統進行升級的，則應當及時通知買方。但無論賣方是否自行對機器設備的軟件系統進行升級，應買方的合理需求，賣方都應當為買方提供機器設備軟件系統的升級服務，有關機器設備軟件系統升級產生的費用由雙方另行協商。

If machinery and equipment provided by Seller are equipped with software system, the software system should be considered the goods under the contract and all terms and conditions under the contract shall be equally appliable thereto. To ensure the proper operation of the machinery and equipment, Seller shall make sure that the software system works properly through the whole life cycle of the machinery and equipment. If the software system suffers malfunction without Buyer’s fault, whether in the warranty period of goods or not, Seller has the obligation to repair or reinstall the software system in the machinery and equipment for Buyer free of charge. In consideration of non-severability between the software system and machinery and equipment, Seller shall grant worldwide, royalty free, irrevocable, non-exclusive using rights for the software system thereof to Buyer before discarding the machinery and equipment. If Seller can upgrade the software system of the machinery and equipment at its own discretion after selling the machinery and equipment to Buyer, Seller shall give timely notice to Buyer; provided, however, that whether Seller upgrades the software system of the machinery and equipment at its own discretion or not, per Buyer’s reasonable requirements, Seller should provide upgrading service of the software system in the machinery and equipment for Buyer, and expenses arising from upgrading service of the software system in the machinery and equipment will be negotiated by the Parties separately.

 

6.服務和替換零件Maintenance Service and Replacement Parts

除非雙方另有約定，賣方至少應當對本合同項下的貨物，即機器設備（含軟件系統）提供一次（含一次）以上的免費保養維護，并有義務指導買方進行正確的保養維護。

Unless agreed by the Parties, Seller shall provide at least no less than one (including one) free maintenance and keeping service for the machinery and equipment (including the software system) and have the obligation to give guidance to Buyer to conduct proper maintenance and repair.

在機器設備的整個壽命周期內，賣方有義務提供替換零件，以保證本合同項下機器設備零件的及時維修和替換。在機器設備的質量保證期內，如果機器設備的零件出現任何質量問題，賣方應當免費為買方進行修理或更換，重新更換后的零件的質保期應當自更換之日起重新開始計算。零件修理或更換兩次仍不能正常使用的，賣方應當按發票價格一次退還貨款。

Within the whole life cycle of the machinery and equipment, Seller has the obligation to provide spare parts to ensure timely repair and replacement for parts of the machinery and equipment. During the warranty period, if the machinery and equipment incurs any quality problems, Seller should carry out repairs or provide replacement for Buyer free of charge. The warranty period of the replaced parts should be restarted from the part replacing date. In case that the parts cannot be used after two times’ repair or replacement, Seller shall reimburse Buyer in accordance with the invoice price.

本條款中有關服務和替換零件的質量保證，雙方同意按照本條款第7條的規定執行。

Parties agree to carry out quality guarantee in this Paragraph 6 related to service and replaced parts in accordance with those set out in Paragraph 7.

 

7.保證 Warranty

賣方明確保證，本合同項下的所有貨物或服務均符合提供給買方或買方提供的規格、圖紙、樣品或說明，以及法律法規的規定，包括但不限于：國家標準、行業標準、地方性標準，并可以合法出售，具有良好材質和工藝，沒有瑕疵。此外，賣方確認其了解買方的用途，并明確保證根據買方申明的用途由賣方選擇、設計、制造或組裝的本合同項下所有貨物將適合并充分滿足買方特定的目的。賣方應提供一個符合法律要求或行業慣例的保證期，如果賣方向買方提供的保證期長于法律規定或行業規定的，則以此較長保證期為準。在保證期內賣方將通過修理、重作、更換或退回等措施以確保其提供的貨物或服務符合本合同項下買方提出的規格、要求、標準或用途，并承擔因此發生的所有費用。

Seller expressly warrants that all goods or services covered by this contract will conform to the specifications, drawings, samples, or descriptions furnished to or by Buyer, the laws and regulations including, but not limited to, the national standards, trade standards and local standards, and will be legally merchantable, of good material and workmanship and free from defect. In addition, Seller acknowledges that Seller knows of Buyer’s intended use and expressly warrants that all goods covered by this contract which have been selected, designed, manufactured, or assembled by Seller, base upon Buyer’s stated use, will be fit and sufficient for the particular purposes intended by Buyer. Seller shall provide a warranty period which is conformed to applicable law or industry regulation. If Seller offers a longer warranty to Buyer than the laws or regulations, such longer period shall apply. Seller shall take measures such as repairing, remaking, replacing or withdrawing to ensure the goods or services under the contract as may be necessary to ensure that such goods or services conform to Buyer’s specification, requirement, standard, purpose, and all expenses incurred thereof shall be borne by Seller.

賣方明確保證，本合同項下的貨物或服務不存在任何的權利瑕疵，未被設定任何形式的擔保，同時不侵犯任何第三方的知識產權。賣方同意，如果存在任何權利瑕疵，賣方都應當立即自行解決上述來自第三方的主張或質疑，保護買方免受損害并補償買方因此遭受的全部損失。

Seller expressly warrants that all goods or services under this contract are free from any defects in rights and any encumbrances, and will not infringe upon any intellectual property rights of any third parties. Seller agrees, in the event that there is any defect in rights, Seller shall settle the claims and challenge from the third party and hold Buyer harmless and reimburse Buyer for all the losses.

賣方明確保證，賣方具有正當合法的許可和授權，銷售本合同中的貨物和服務，為所有貨物和服務的真正所有者。如因營業范圍或國際貿易經營權(如適用的話)或其他原因或因所有權原因遭到第三方質疑，本合同被任何法院、仲裁機構或政府機構判為無效，則賣方應對該等法院、仲裁機構或政府機構認定并實施的任何處罰（如有的話）負有完全責任，并應保護買方免受損害，補償買方因此所遭受的損失。

Seller expressly warrants that Seller is duly and legally licensed and authorized to be engaged in the sale of and, is the true owner of the goods and service, any and all goods and services covered by this contract and in case the contract is held void by any court, arbitration institution or governmental authority(ies) due to issues concerning the scope of business or the right to engage in international trading rights, if applicable, or challenged by any third party due to title defect, Seller shall be fully responsible for any penalty imposed by such court or arbitration institutions or governmental authority(ies), if any, and shall hold Buyer harmless therefrom, and compensate Buyer for the losses suffered thereof.

此外，賣方對環境、職業安全衛生做出如下保證：賣方應保證提供的產品或服務滿足買方相關環境及安全要求，遵守國家及地方的環境、職業安全衛生方面的法律法規，同時加強管理，防止環境、安全相關事故的發生。對于進入買方場地的賣方人員須服從買方人員有關安全方面的合理指導。賣方應要求其工作人員依據買方的要求簽訂必要的文件，該等工作人員以個人名義簽署的上述文件并不免除賣方作為合同締約方的義務和責任。

In addition, Seller hereby makes the following warranties concerning environmental protection and occupational safety and hygiene: Seller warrants that all the goods or services provided shall meet Buyer’s requirements in terms of environmental protection and occupational safety and hygiene, obey national and local laws and regulations in terms of environmental protection and occupational safety and hygiene, and shall enhance management to prevent environment or safety accidents from happening. All Seller’s employees entering Buyer’s premises shall obey reasonable instructions provided by Buyer. Seller shall require its employees to sign the necessary documents in accordance with Buyer’s requirements, such signing of documents by Seller’s employees will not exempt Seller from any obligation and liability as a party to this contract.

 

8.不合格貨物或服務 Nonconforming Goods or Services

賣方同意買方不必對產品進行到貨檢查，并放棄要求買方進行到貨檢查的權利。除非買方另行通知賣方，本合同項下的數量應隨著買方拒收的不合格貨物量而自動減少。未經買方另有書面要求或新的交付要求，賣方不得補足該等減少的數量。賣方應當根據買方的要求及時回收上述不合格貨物，并由賣方承擔所有的風險。賣方在收到買方通知后未能根據上述通知的要求或者商業上認為更短的合理時間內回收上述貨物，則買方有權選擇向賣方收取倉儲費和搬運費或自行處理貨物而不對賣方承擔法律責任，貨物的風險由賣方承擔。本款規定不限制或妨礙買方在本合同項下所享有的要求任何合法補救的權利，也不解除賣方對貨物或服務的潛在瑕疵應負的責任。買方對貨物或服務的接受或付款不表示買方對貨物或服務符合合同的確認，也不減損賣方在本合同項下的保證義務。

Seller agrees that Buyer will not perform incoming inspections of the goods or service, and waives any rights to require Buyer to conduct such inspections. To the extent Buyer rejects goods as nonconforming, the quantities under this contract will automatically be reduced unless Buyer notifies Seller otherwise. Seller will not replace quantities so reduced without a new written requirement or delivery schedule from Buyer. Seller shall withdraw the nonconforming goods aforesaid in accordance with the requirement of Buyer, and all risks shall be borne by Seller. Seller’s failure to withdraw nonconforming goods within the period stipulated in Buyer’s instructions or such shorter period as may be commercially reasonable under the circumstances, after notice of nonconformity shall entitle Buyer at its option, to charging Seller for storage and handling, or to dispose of the goods, without any liability to Seller. All risks aforesaid shall be borne by Seller. This Paragraph shall not limit or impair Buyer’s right to assert any legal remedy pursuant to this contract or relieve Seller’s responsibility for latent defects. Acceptance of goods or services, or payment for goods or services by Buyer shall not constitute acknowledgement of the goods or services conforming to the contract, and will not derogate the warranty liability of Seller under this contract.

 

9.成分說明、特殊警告和指示 Ingredients Disclosure, Special Warnings And Instructions

如買方要求，賣方應立即按買方指定的形式和細節向買方提供：(a) 本合同項下貨物的所有成分的清單；(b) 某一種或多種成分的數量；(c)有關該種成分任何變化或增加的信息。賣方同意,每批貨物發運前和發運時，賣方應就貨物中有危險材料的成分或任何部分向買方提供足夠的書面警告和書面通知（包括在貨物、容器和包裝上貼適當的標簽），以及提供必要的特殊搬運指示，告知承運人、買方及其各自的雇員如何采取謹慎和防護措施，以便在貨物、容器及包裝的搬運、運輸、使用或處理中最大限度地避免人身傷害或財產損失。

If requested by Buyer, Seller shall promptly furnish to Buyer in such form and detail as Buyer may direct: (a) a list of all ingredients in the goods purchased hereunder; (b) the amount of one or more ingredients; and (c) information concerning any changes in or additions to such ingredients. Prior to and with the shipment of the goods, Seller agrees to furnish to Buyer sufficient warning and notice in writing (including appropriate labels on goods, containers and packing) of any hazardous material which is an ingredient or a part of any of the goods, together with such special handling instructions as may be necessary to advise carriers, Buyer, and their respective employees of how to exercise that measure of care and precaution which will best prevent bodily injury or property damage in the handling, transportation, processing, use or disposal of the goods, containers and packing shipped to Buyer.

 

10.變更 Change

買方保留在任何時候指示或促使賣方變更貨物或服務的圖紙和規格，或變更本合同所涵蓋的工作范圍的權利，且賣方同意立即進行該等變更，由此等變更所造成的價格或履約時間上的任何變化，應由買賣雙方協商后做出合理的調整。對本合同的任何變更應根據本條款第31條規定進行。

Buyer reserves the right at any time to direct changes, or cause Seller to make changes, to drawings and specifications of the goods or services or to otherwise change the scope of the work covered by this contract, and Seller agrees to promptly make such changes; any difference in price or time for performance resulting from such changes shall be equitably adjusted after negotiation between Buyer and Seller. Any changes to this contract shall be made in accordance with Paragraph 31. 

 

11.買方財產 Buyer’s Property

買方直接或間接向賣方提供用于履行本合同的，或買方已向賣方付款的所有供應品、材料、工具、夾具、模具、量器、固定裝置、鑄型、模型、設備和其他物品應全部屬于買方財產，并以寄存形式放置在賣方處(“買方財產”)。買方不對該財產的質量作出保證，賣方應在驗收前檢查所有該等財產。賣方應承擔買方財產滅失或損壞的風險。買方財產應由賣方負責妥善安置和維護并承擔費用，賣方不得將其用于履行本合同之外的其他目的；賣方應將買方財產進行明顯的標記，標明是買方財產；并且不得與賣方或任何第三方財產混置，且未經買方事先書面批準不得將其搬出賣方場地，同時也有義務確保買方財產不受到任何第三方的侵害、侵占、損害。買方有權在任何適當時間內進入賣方場地檢查該財產及賣方所做的有關記錄。如買方要求，賣方應立即將該財產歸還或送交買方，(a) 按照買方所選擇的運送該財產的承運人的要求正確包裝并做標注，在賣方工廠按離岸價格運輸設備；或 (b) 運送到任何買方指定的地點，在此情況下，買方應付給賣方運送該財產到該地點的合理費用。在法律允許的情況下，賣方同意放棄對任何買方財產擁有的任何留置權或其它權利,包括，但不限于，由本合同或與買方的其它合同而產生的抵扣權、求償權或反訴權。

All supplies, materials, tools, jigs, dies, gauges, fixtures, molds, patterns, equipments and other items furnished by Buyer, either directly or indirectly, to Seller to perform this contract, or for which Seller has been reimbursed by Buyer, shall be and remain the property of Buyer and held by Seller on a bailment basis (“Buyer’s Property”). Buyer shall make no warranty on the quality of Buyer’s Property, and Seller shall inspect any and all of such Buyer’s Property before acceptance. Seller shall bear the risk of loss of and damage to Buyer’s Property. Buyer’s Property shall at all times be properly housed and maintained by Seller at its expense, shall not be used by Seller for any purpose other than the performance of this contract; shall be conspicuously marked by Seller as the property of Buyer; shall not be commingled with the property of Seller or with that of a third party; and shall not be moved from Seller’s premises, without Buyer’s prior written approval. In addition, Seller shall ensure Buyer’s Property is kept free from any infringement, invasion, or damage by any third parties. Buyer shall have the right to enter onto Seller’s premises at all reasonable times to inspect such Buyer’s Property and Seller’s records with respect thereto. Upon the request of Buyer, such Buyer’s Property shall be immediately released to Buyer or delivered to Buyer by Seller, either (a) F.O.B. transport equipment at Seller’s plant, properly packed and marked in accordance with the requirements of the carrier selected by Buyer to transport such property, or (b) to any location designated by Buyer, in which event Buyer shall pay to Seller the reasonable cost of delivering such property to such location. When permitted by laws, Seller waives any liens or other rights that Seller might otherwise have, including, but not limited to, any rights of setoff, recoupment or counterclaim arising from this or any other transactions with Buyer.

 

12.賣方財產 Seller’s Property

除非買方另行同意，賣方應負責提供、完好保存及需要時更換生產貨物所需的所有機器、設備、工具、夾具、模具、量器、固定裝置、鑄型、模型和其它裝備（“賣方財產”），并自行承擔其費用。經買方事先書面同意，為進行買方批準的設計和規格改變之需而對賣方財產所做的任何改動而支付的費用應由買方承擔。賣方應為賣方財產投保財產險，并且應按改動后賣方財產的重置價值投�；痣U和全額險。賣方在此不可撤銷地授予買方對那些生產貨物所需的賣方財產占有和擁有期權，此項期權只有在向賣方支付了這些財產的成本扣減去折舊攤銷及任何買方已支付給賣方的費用的凈值部分后才可能行使；但是，如果該賣方財產被用作生產賣方標準庫存貨物或賣方同時在將大量同類貨物銷售給其他方時，則此項期權不得行使。

Unless otherwise agreed to by Buyer, Seller at its own expense shall furnish, keep in good condition, and replace when necessary all machinery, equipments, tools, jigs, dies, gauges, fixtures, molds, patterns and other items ("Seller’s Property") necessary for the production of the goods. The cost of changes to Seller’s Property necessary to make design and specification changes authorized by Buyer with its prior written consent shall be paid for by Buyer. Seller shall insure Seller’s Property with full fire and extended coverage insurance for replacement value thereof. Seller grants Buyer an irrevocable option to take possession of and title to Seller’s Property that are special for the production of the goods upon payment to Seller of its net book value less the depreciation and any amounts which Buyer has previously paid to Seller for the cost of such items; provided, however, that this option shall not apply if Seller’s Property is used to produce goods that are the standard stock of Seller or if a substantial quantity of like goods are being sold by Seller to others.

以上是譯博小編為大家精心收集的文章，更多關于合肥翻譯公司的咨詢請繼續關注安徽譯博翻譯！